Workmaster plate for Kubota B & L series with PIN ON bucket ONLY
SKU# LPINON
This workmaster plate is specifically designed for the B & L series with the PIN On bucket ONLY for bucket model numbers below. If you have a quick attach bucket (2 levers to take your bucket on and off) this plate will NOT work. Please refer to SKU number KWM or B2371 for our workmaster plates for the quick attach buckets.
Kubota has numerous different bucket options for most tractors, please locate your buckets model number on the backside of your bucket. Please refer to our very last picture for reference on location.
Works ONLY with bucket models:
L2242
L2243
L2246
L2263
L2264
L2276
B1626
B2345
B2355
Commonly found Kubota B and L series tractors.
NOTE: If you can not find the model number of your bucket you can send us a picture of your bucket and we will be able to confirm fitment.
Approximatley 22” wide, 1/4” thick steel plate foundation formed on the front leading edge for increased strength. Comes with 2 rear support brackets.
(2) 5/16” Forged in USA grab hooks (G70) rated at 6600lbs WLL (Accepts 3/8” chain and under)
(2) 5/8” Tow/Grab Handles (5000lb WLL)
(1) 2” receiver with 5/8” center hole
Mig welded construction
Full Industrial Grade E-Coat and Powdercoat
All grade 8 hardware included
Instructions for mounting
Installation time: 25-30min
Drill bit required: 7/16” & 1/2” (Sold separately) We also sell a Dewalt step bit that will drill both size holes
The Workmaster Plate is the perfect addition to your tractor for the hobby farm enthusiast, from moving around small trailers to lifting awkward materials and pulling those unwanted shrubs out to safely securing your tractor during transport, you will always find a job for the workmaster plate!
SKU# LPINON
This workmaster plate is specifically designed for the B & L series with the PIN On bucket ONLY for bucket model numbers below. If you have a quick attach bucket (2 levers to take your bucket on and off) this plate will NOT work. Please refer to SKU number KWM or B2371 for our workmaster plates for the quick attach buckets.
Kubota has numerous different bucket options for most tractors, please locate your buckets model number on the backside of your bucket. Please refer to our very last picture for reference on location.
Works ONLY with bucket models:
L2242
L2243
L2246
L2263
L2264
L2276
B1626
B2345
B2355
Commonly found Kubota B and L series tractors.
NOTE: If you can not find the model number of your bucket you can send us a picture of your bucket and we will be able to confirm fitment.
Approximatley 22” wide, 1/4” thick steel plate foundation formed on the front leading edge for increased strength. Comes with 2 rear support brackets.
(2) 5/16” Forged in USA grab hooks (G70) rated at 6600lbs WLL (Accepts 3/8” chain and under)
(2) 5/8” Tow/Grab Handles (5000lb WLL)
(1) 2” receiver with 5/8” center hole
Mig welded construction
Full Industrial Grade E-Coat and Powdercoat
All grade 8 hardware included
Instructions for mounting
Installation time: 25-30min
Drill bit required: 7/16” & 1/2” (Sold separately) We also sell a Dewalt step bit that will drill both size holes
The Workmaster Plate is the perfect addition to your tractor for the hobby farm enthusiast, from moving around small trailers to lifting awkward materials and pulling those unwanted shrubs out to safely securing your tractor during transport, you will always find a job for the workmaster plate!
SKU# LPINON
This workmaster plate is specifically designed for the B & L series with the PIN On bucket ONLY for bucket model numbers below. If you have a quick attach bucket (2 levers to take your bucket on and off) this plate will NOT work. Please refer to SKU number KWM or B2371 for our workmaster plates for the quick attach buckets.
Kubota has numerous different bucket options for most tractors, please locate your buckets model number on the backside of your bucket. Please refer to our very last picture for reference on location.
Works ONLY with bucket models:
L2242
L2243
L2246
L2263
L2264
L2276
B1626
B2345
B2355
Commonly found Kubota B and L series tractors.
NOTE: If you can not find the model number of your bucket you can send us a picture of your bucket and we will be able to confirm fitment.
Approximatley 22” wide, 1/4” thick steel plate foundation formed on the front leading edge for increased strength. Comes with 2 rear support brackets.
(2) 5/16” Forged in USA grab hooks (G70) rated at 6600lbs WLL (Accepts 3/8” chain and under)
(2) 5/8” Tow/Grab Handles (5000lb WLL)
(1) 2” receiver with 5/8” center hole
Mig welded construction
Full Industrial Grade E-Coat and Powdercoat
All grade 8 hardware included
Instructions for mounting
Installation time: 25-30min
Drill bit required: 7/16” & 1/2” (Sold separately) We also sell a Dewalt step bit that will drill both size holes
The Workmaster Plate is the perfect addition to your tractor for the hobby farm enthusiast, from moving around small trailers to lifting awkward materials and pulling those unwanted shrubs out to safely securing your tractor during transport, you will always find a job for the workmaster plate!
