Workmaster Plate for Kubota L2296 Quick Attach Bucket
Works ONLY with The Kubota L2296 Quick Attach Bucket
Commonly found on Kubota L, Grand L, and MX series tractors
All Kubota buckets have a model number labeled on the backside of the bucket. Please refer to our very last picture for reference on location.
Features:
Approximately 22” wide, 1/4” thick steel plate foundation.
Formed on the front leading edge to perfectly match the contour of your bucket while also adding strength!
(2) 3/8” Forged in USA grab hooks (G70) rated at 6600lbs WLL (Accepts 3/8” chain and under)
(2) 5/8” Tow/Grab Handles (5000lb WLL)
(1) 2” receiver with (2) 5/8” hitch pin holes
Mig welded construction
Full Industrial Grade E-Coat and Powdercoat
All grade 8 hardware included
Instructions for mounting
Installation time: Approximately 30min
Drill bit required: 1/2” (not included)
The Workmaster Plate is the perfect addition to your tractor for the hobby farm enthusiast, from moving around small trailers to lifting awkward materials and pulling those unwanted shrubs out to safely securing your tractor during transport, you will always find a job for the workmaster plate!
Works ONLY with The Kubota L2296 Quick Attach Bucket
Commonly found on Kubota L, Grand L, and MX series tractors
All Kubota buckets have a model number labeled on the backside of the bucket. Please refer to our very last picture for reference on location.
Features:
Approximately 22” wide, 1/4” thick steel plate foundation.
Formed on the front leading edge to perfectly match the contour of your bucket while also adding strength!
(2) 3/8” Forged in USA grab hooks (G70) rated at 6600lbs WLL (Accepts 3/8” chain and under)
(2) 5/8” Tow/Grab Handles (5000lb WLL)
(1) 2” receiver with (2) 5/8” hitch pin holes
Mig welded construction
Full Industrial Grade E-Coat and Powdercoat
All grade 8 hardware included
Instructions for mounting
Installation time: Approximately 30min
Drill bit required: 1/2” (not included)
The Workmaster Plate is the perfect addition to your tractor for the hobby farm enthusiast, from moving around small trailers to lifting awkward materials and pulling those unwanted shrubs out to safely securing your tractor during transport, you will always find a job for the workmaster plate!
Works ONLY with The Kubota L2296 Quick Attach Bucket
Commonly found on Kubota L, Grand L, and MX series tractors
All Kubota buckets have a model number labeled on the backside of the bucket. Please refer to our very last picture for reference on location.
Features:
Approximately 22” wide, 1/4” thick steel plate foundation.
Formed on the front leading edge to perfectly match the contour of your bucket while also adding strength!
(2) 3/8” Forged in USA grab hooks (G70) rated at 6600lbs WLL (Accepts 3/8” chain and under)
(2) 5/8” Tow/Grab Handles (5000lb WLL)
(1) 2” receiver with (2) 5/8” hitch pin holes
Mig welded construction
Full Industrial Grade E-Coat and Powdercoat
All grade 8 hardware included
Instructions for mounting
Installation time: Approximately 30min
Drill bit required: 1/2” (not included)
The Workmaster Plate is the perfect addition to your tractor for the hobby farm enthusiast, from moving around small trailers to lifting awkward materials and pulling those unwanted shrubs out to safely securing your tractor during transport, you will always find a job for the workmaster plate!
